vs-60.pf1.pbf series, vs-60.pf1.-m3 series www.vishay.com vishay semiconductors revision: 20-oct-11 1 document number: 93721 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fast soft recovery rectifier diode, 60 a features ? 150 c max. operatin g junction temperature ? low forward voltage drop and short reverse recovery time ? designed and qualified according to jedec-jesd47 ? compliant to rohs directive 2002/95/ec ? halogen-free according to iec 61249-2-21 definition (-m3 only) applications these devices are intended for use in output rectification and freewheeling in inverters, choppers and converters as well as in input rectification where severe restrictions on conducted emi should be met. description the vs-60epf1... and vs-60apf1. .. soft recovery rectifier series has been optimized for combined short reverse recovery time and low forward voltage drop. the glass passivation ensures stable reliable operation in the most severe te mperature and power cycling conditions. product summary package to-247ac modified (2 pins), to-247ac i f(av) 60 a v r 1000 v, 1200 v v f at i f 1.4 v i fsm 700 a t rr 95 ns t j max. 150 c diode variation single die snap factor 0.6 to-247ac modified to-247ac vs-60apf1... vs-60epf1... 2 1 3 cathode anode 2, 4 anode 1 anode 3 base common cathode base common cathode major ratings and characteristics symbol characteristics values units v rrm 1000 to 1200 v i f(av) sinusoidal waveform 60 a i fsm 700 t rr 1 a, - 100 a/s 95 ns v f 30 a, t j = 25 c 1.2 v t j range - 40 to 150 c voltage ratings part number v rrm , maximum peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm at 150 c ma vs-60epf10pbf, vs-60apf10pbf vs-60epf10-m3, vs-60apf10-m3 1000 1100 8 vs-60epf12pbf, vs-60apf12pbf vs-60epf12-m3, vs-60apf12-m3 1200 1300
vs-60.pf1.pbf series, vs-60.pf1.-m3 series www.vishay.com vishay semiconductors revision: 20-oct-11 2 document number: 93721 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 absolute maximum ratings parameter symbol test conditions values units maximum average forward current i f(av) t c = 103 c, 180 conduction half sine wave 60 a maximum peak one cycle non-repetitive surge current i fsm 10 ms sine pulse, rated v rrm applied 700 10 ms sine pulse, no voltage reapplied 830 maximum i 2 t for fusing i 2 t 10 ms sine pulse, rated v rrm applied 2450 a 2 s 10 ms sine pulse, no voltage reapplied 3460 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no voltage reapplied 34 600 a 2 ? s electrical specifications parameter symbol test conditions values units maximum forward voltage drop v fm 60 a, t j = 25 c 1.4 v forward slope resistance r t t j = 125 c 4.6 m ? threshold voltage v f(to) 0.9 v maximum reverse leakage current i rm t j = 25 c v r = rated v rrm 0.1 ma t j = 150 c 8 recovery characteristics parameter symbol test conditions values units reverse recovery time t rr i f at 60 a pk 25 a/s 25 c 480 ns reverse recovery current i rr 8a reverse recovery charge q rr 2.7 c snap factor s 0.6 thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg - 40 to 150 c maximum thermal resistance, junction to case r thjc dc operation 0.4 c/w maximum thermal resistance, junction to ambient r thja 40 typical thermal resistance, case to heatsink r thcs mounting surface, smooth and greased 0.2 approximate weight 6g 0.21 oz. mounting torque minimum 6 (5) kgf cm (ibf in) maximum 12 (10) marking device case style to-247ac modified 60epf10 60epf12 case style to-247ac 60apf10 60apf12 i fm t rr dir dt i rm(rec) q rr t
vs-60.pf1.pbf series, vs-60.pf1.-m3 series www.vishay.com vishay semiconductors revision: 20-oct-11 3 document number: 93721 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - current rating characteristics fig. 2 - current rating characteristics fig. 3 - forward power loss characteristics fig. 4 - forward power loss characteristics fig. 5 - maximum non-re petitive surge current fig. 6 - maximum non-re petitive surge current 0 30 maximum allowable case temperature (c) average forward current (a) 20 10 40 50 60 70 90 100 110 120 130 140 150 60.pf.. series r thjc (dc) = 0.4 c/w conduction angle 60 30 90 180 120 ? 0 maximum allowable case temperature (c) average forward current (a) 20 40 60 80 100 dc 90 100 110 120 130 140 150 60.pf.. series r thjc (dc) = 0.4 c/w ? conduction period 30 60 90 120 180 maximum average forward power loss (w) average forward current (a) 0 10 20 30 40 50 60 70 80 90 100 rms limit 180 120 90 60 30 conduction angle 60.pf.. series t j = 150 c 0 30 20 10 40 50 60 70 ? maximum average forward power loss (w) average forward current (a) 0 20 40 60 80 100 0 20 40 60 80 100 120 140 rms limit ? conduction period 60.pf.. series t j = 150 c dc 180 120 90 60 30 1 10 100 peak half sine wave forward current (a) number of equal amplitude half cycle current pulses (n) 300 400 500 600 700 800 60.pf.. series initial t j = 150 c at 60 hz 0.0083 s at 50 hz 0.0100 s at any rated load condition and with rated v rrm applied following surge. 0.01 0.1 1 peak half sine wave forward current (a) pulse train duration (s) 300 400 500 600 700 800 900 60.pf.. series initial t j = 150 c no voltage reapplied rated v rrm reapplied maximum non-repetitive surge current versus pulse train duration.
vs-60.pf1.pbf series, vs-60.pf1.-m3 series www.vishay.com vishay semiconductors revision: 20-oct-11 4 document number: 93721 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - forward voltage drop characteristics fig. 8 - recovery time characteristics, t j = 25 c fig. 9 - recovery time characteristics, t j = 150 c fig. 10 - recovery charge characteristics, t j = 25 c fig. 11 - recovery charge characteristics, t j = 150 c 1000 10 100 1 0.5 0 1.0 1.5 2.0 2.5 3.0 instantaneous forward current (a) instantaneous forward voltage (v) t j = 25 c t j = 150 c 60.pf.. series 0 40 80 120 160 200 t rr - maximum reverse recovery time (ns) di/dt - rate of fall of forward current (a/s) 0 100 200 300 400 500 600 60.pf.. series t j = 25 c i fm = 60 a i fm = 10 a i fm = 1 a i fm = 30 a i fm = 5 a 0 40 80 120 160 200 t rr - maximum reverse recovery time (ns) di/dt - rate of fall of forward current (a/s) 0 200 400 600 800 1000 1200 60.pf.. series t j = 150 c i fm = 60 a i fm = 10 a i fm = 1 a i fm = 30 a i fm = 5 a 0 40 80 120 160 200 q rr - maximum reverse recovery charge (c) di/dt - rate of fall of forward current (a/s) 0 2000 4000 6000 8000 10 000 12 000 60.pf.. series t j = 25 c i fm = 60 a i fm = 1 a i fm = 30 a i fm = 10 a i fm = 5 a 0 40 80 120 160 200 q rr - maximum reverse recovery charge (c) di/dt - rate of fall of forward current (a/s) 0 5000 10 000 15 000 20 000 25 000 60.pf.. series t j = 150 c i fm = 60 a i fm = 1 a i fm = 30 a i fm = 10 a i fm = 5 a
vs-60.pf1.pbf series, vs-60.pf1.-m3 series www.vishay.com vishay semiconductors revision: 20-oct-11 5 document number: 93721 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 12 - recovery current characteristics, t j = 25 c fig. 13 - recovery current characteristics, t j = 150 c fig. 14 - thermal impedance z thjc characteristics 0 40 80 120 160 200 i rr - maximum reverse recovery current (a) di/dt - rate of fall of forward current (a/s) 0 5 10 15 20 25 30 35 40 45 60.pf.. series t j = 25 c i fm = 60 a i fm = 1 a i fm = 30 a i fm = 10 a i fm = 5 a 0 40 80 120 160 200 i rr - maximum reverse recovery current (a) di/dt - rate of fall of forward current (a/s) 0 10 20 30 40 50 60 60.pf.. series t j = 150 c i fm = 60 a i fm = 1 a i fm = 30 a i fm = 10 a i fm = 5 a 10 0.0001 0.001 0.01 0.1 1 square wave pulse duration (s) z thjc - transient thermal impedance (c/w) 0.001 0.01 0.1 1 d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.08 steady state value (dc operation) 60.pf.. series single pulse
vs-60.pf1.pbf series, vs-60.pf1.-m3 series www.vishay.com vishay semiconductors revision: 20-oct-11 6 document number: 93721 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table ordering information (example) preferred p/n quantity per t/r minimum order quantity packaging description vs-60epf10pbf 25 500 antist atic plastic tubes vs-60epf10-m3 25 500 antist atic plastic tubes vs-60apf10pbf 25 500 antist atic plastic tubes vs-60apf10-m3 25 500 antist atic plastic tubes vs-60epf12pbf 25 500 antist atic plastic tubes vs-60epf12-m3 25 500 antist atic plastic tubes vs-60apf12pbf 25 500 antist atic plastic tubes vs-60apf12-m3 25 500 antist atic plastic tubes links to related documents dimensions to-247ac modified www.vishay.com/doc?95253 to-247ac www.vishay.com/doc?95223 part marking information to-247ac modified pbf www.vishay.com/doc?95255 to-247ac modified -m3 www.vishay.com/doc?95442 to-247ac pbf www.vishay.com/doc?95226 to-247ac -m3 www.vishay.com/doc?95007 2 - current rating (60 = 60 a) 1 - vishay semiconductors product 3 - circuit configuration: e = single diode a = single diode, 3 pins 4 - package: p = to-247ac/to-247ac modified 5 - type of silicon: f = fast recovery 6 - voltage code x 100 = v rrm - environmental digit: 7 pbf = lead (pb)-free and rohs compliant -m3 = halogen-free, rohs compliant and terminations lead (pb)-free 10 = 1000 v 12 = 1200 v device code 5 1 3 2 4 6 7 60 vs- e p f 12 pbf
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
